Best Benchtop Table Saws for the Money

The table saws are the lifeblood of woodworking. Benchtop Table Saw (also known as a portable table saw or Jobsite Table Saw) can save a ton of time for woodworkers on the job site.

Benchtop saws are much more accurate than the handheld circular variety. What you need is to just select and buy a good model.

Benchtops are designed to be put on a table, on a tailgate of a pickup, on the floor or even on the ground.

They’re generally lightweight about 40 to 80 lbs. woodworker can easily carry them to the job site, cut what they need to, then put them back up.

Comparison Table of Benchtop Table Saws:

The table saws chart and reviews guide located below contains almost 05 Benchtop Table Saws for you to compare.

120 Volts
15 Amps
1-3/4 HPs
20 Inchs$$4.6
120 Volts
15 Amps
1-3/4 HPs
24-1/2 Inchs$$$4.7
Bosch 4000-09
120 Volts
15 Amps
1-3/4 HPs
25 Inchs$$$$4.5
Bosch 4100-09
120 Volts
15 Amps
1-3/4 HPs
25 Inchs$$4.4
Bosch 4100

120 Volts
15 Amps
1-3/4 HPs
25 Inchs$$$4.6

Advantages of Using Benchtop Table Saws:

  • They are inexpensive than other table saws.
  • Benchtop table saws weigh lighter so more portable compared to others table saws.
  • These are engineered for operation while using another support.
  • Benchtop saws possess a direct drive coming from a general motor.
  • Even a single person can easily lift and carry benchtop saw to job site.
  • The narrower upper portion of benchtop saws reduces the stock’s width (rip able).

Reviews of the 5 Best Benchtop Table Saws:

Here in this post, I will write six best Benchtop Table Saws review. By the help of these Benshtop Table Saws review you will be in a better position to compare the features and prices of Best Benchtop Table Saws , then you can easily decide to buy a Benchtop Table Saw which best meets your needs.

DEWALT DW745 10 Inch Job Site Capacity


DEWALT DW745 is 10-Inch Compact Job-Site Benchtop Table Saw. Its Max Rip Capacity is 20-inch and its 15 amp high performing motor cuts hardwoods very quickly.

With the help of its pinion fence rails and rack a professional woodworker can easily make fast, smooth, and accurate fence adjustments. Its 20-inch a rip can accurately cut a range of larger shelving and trim materials.

The metal roll cage base of DEWALT offers greater durability than the plastic cage bases.

For bevel applications, its blade can be adjusted 0 – 45 degrees. Due to its 15 amp, high-torque motor, this DEWALT Benchtop Table Saw delivers the required power needed for cutting hardwood and pressure-treated lumber.

DEWALT also has a versatile Site-Pro Modular Guarding System by the help of which woodworker can set up for a variety of applications as it allows tool-free adjustment of application-specific guarding components.

Another best feature s that DEWALT table saw just weighs 45 pounds so woodworker can easily move it from workshop to the worksite. (read my review)

The main drawback of DEWALT DW745 is that its arbour is a litter short to support dado blades. It works pretty fine for simple framing cuts but this cannot handle building cabinets. The blade guard of this tool is made of plastic and will possibly break if stressed more.

DEWALT DW744XRS 10 Inch Table Rolling


The DEWALT DW744XRS is a versatile 10-Inch Jobsite Benchtop Table Saw with Rolling Stand. It is a portable design with 15 amp powerful motor and it has a max rip capacity of 24-1/2 inches.

This table saw offers application-specific setups with the Site-Pro Modular Guarding System. It has a miter gauge, a 10-inch along with 24-tooth carbide blades and a push stick. DEWALT table saw weigh just 58 pounds and as it also has a compact rolling stand so woodworker can easily move it from workshop to job site.

The rolling stand of DEWALT DW744XRS adds a LOT of weight to the saw. When the worker folds rolling stand up and stand it on end to roll it, the side extension of stand slides out and hits the floor and makes a frustrating sound. 

Bosch 4000-09 10 Inch Benchtop Table Saw


In terms of wood working, a good quality power tool is a big deal. The market lately has a lot to offer with too good to be true promises on labels.

However, the moment you set-up the equipment and started using it, that is when you realize that you were fooled. In this case, Bosch 4000-09 had kept true and justified the reviews made by woodworkers.

From the soft start motor to a good fitting miter gauge, to a reliable and expandable fence, you can never complain. Having this tool is indeed a potential for every woodworker to be proud of.

It appears that this table saw is exactly what every woodcarver requires. It has a large tabletop to accommodate the woods that require cutting, a safe blade guard that can easily be put on and off, and an impressive gravity rise-stand for flexible mobility.

You get no chance to be disappointed with this tool as it seems to have been made out of the ideas of expert woodworkers and carpenters.

If you are a Bosch believer, this can be another excellent addition to your collection. From the installation until the actual operation, the efficiency of the equipment is highly remarkable. (read my review)

Bosch 4100-09 10 Inch Worksite Gravity Rise

The miter gauge of Bosch 4100-09 fits sloppily in the slot. Due to the small size, it has lesser mass, and this increases the vibration while cutting so blade height gradually changes by vibrations and there is no way to lock this. 

The Bosch 4100-09 is a 10-Inch Benchtop Table Saw with Gravity-Rise Stand (TS3000). It is Powerful Table Saw Designed for High-Precision, effortless, efficient, and accurate cutting by the help of which a woodworker can deliver products faster.

Due to its portable construction, it can transfer across even the roughest terrain. Its weight is 99 pounds. This Large Cutting Table with Squarelock Rip Fence provides high-precision cutting with 3,650 rpm.

It also has Smart Guard System for Added Protection and Visibility. It can handles stock up to 25 inches wide.

Bosch 4100 10 Inch Worksite Table


The drawback of Bosch 4100 is that the groove in the top of the table that guides the push through for cross cuts is a bit sloppy. So woodworkers need to insert a shim for reducing this slop to get repetitive 90-degree crosscuts. (read my review)

The Bosch 4100 is a 10-Inch Benchtop Table Saw that offers some best new features as well as enhancements of durability and high-performance. The Bosch 4100 has the best Modular Smart Guard System.

It includes a T-slot miter gauge, a squareLock Rip Fence with fence slots and a super-durable sub-base along with carry handles.  Its Squarelock Rip Fence is specially designed for maximum accuracy.

The durable sub-base of this benchtop table saw increases its life as it handles job-site abuse. The integrated carry handles of Bosch 4100 increases portability.

Its single point bevel movement provides consistent accuracy. With all these best features, the price of this Benchtop Table Saw is still cheap.


Now that you are aware of the advantages and disadvantages of each of the Benchtop Table Saw, you will surely have a new idea what to purchase.

Reviews and certain considerations can be taken note of as a guide for deciding what exactly you need. I also recommend checking out Red Brewer’s Rockwell RK7323 Bladerunner X2 review for another awesome benchtop saw!

By the help of the above best benchtop table saw reviews you come to know about the features of different table saws.

You can easily compare the features of different benchtop table saws and then decide to buy one which suits you best.


Getting a Sawzall in 2021

Sawzall blades are used to cut through the cloth, whether you are utilizing wood or metal. They come in a variety of diverse sizes, blades, and capacities.

Sawzall blades are manufactured from various types of metal, such as magnesium alloy, copper alloy, stainless steel, and plastic. The best performing, resilient, durable metal cutting edge Sawzall, the Morse Master Copper 9‰ could be the best one available on the market today.

It has been around for nearly thirty years; however, Sawzall blades are still very popular today. They are easy to use and can make the work of cutting through the material easier. Together with most of the several sizes available, there’s sure to be the one that is ideal for your needs.

There are two main types of Sawzalls available. One may be the straight cut, which comes with an open groove across the boundary of the blade, while the other is called the crosscut, which cuts down to either side of the groove.

Since you may see, there are many diverse options available when you are searching to get a Sawzall. You might choose to discover a blade which suits the kind of job you will need to complete. There are several distinct brands, and also you can even compare prices by simply calling around.

So as to detect the perfect Sawzall blade, then you will need to master as much about different types of generators accessible as possible. A good place to begin is to ask the people at your neighborhood home improvement shop.

If they have a good reputation, you might get a better bargain on the Sawzall that you are considering purchasing. Also, for those who have a good friend who works there, you might well be able to have yourself a recommendation. However, the net is also a wonderful place to look for the very best prices.

Besides purchasing on the web, it is also possible to find an excellent deal on a Sawzall by purchasing secondhand. Some online stores sell off their saws that are used at a lower price to earn even more profit. The web also provides you the capacity to discover a vast range of items to select from when it comes to cutting equipment.

One option that is always available would be to find a used saw from a family member or friend. Even when they have no use for this, then this might be an alternative that you consider. However, it’s important to bear in mind that if you get it used, the warranty won’t be as fantastic as it would be if you bought fresh.

When looking for a secondhand saw, you will need to bear in mind several things. It’s vital to be certain the saw is functioning properly so that you don’t risk injury in addition to being able to purchase a saw that meets your finances.

It is also essential to take a look at the standard of the saw, so you are sure that the product quality will soon be just as large as the brand name you are familiar with.

If you are not sure of the level of job that you require the watched for, you might choose to have a look at other forms of saws and figure out what you need prior to making a purchase.

In the event, you choose to buy secondhand, then make certain that you take the time to look at the reviews which are on the product.

Make the time to read some reviews that are compiled by consumers and then compare the reviews to determine which kind of law you are considering purchasing. 

You might also want to contact the company that makes the saw to learn extra info on the company and what sort of warranty can be found on the product that you choose. Many companies offer guarantees, and you also may be amazed at the choices you must choose from. By doing your research, you may be in a position to receive the Sawzall that meets your unique needs.


Why You Should Consider the Hegner Scroll Saw

Obviously, one of the first things that many people want to know when they start a scrolling hobby is finding the appropriate Hegner scroll saw to buy. 

Whether you want to buy your first Hegner scroll saw or want to upgrade, there are many things to consider which can be outlined as follows;

Blades holders and blades replacement: the Hegner scroll saw must meet the 5 “pinless standard blades. Many rollers simply cannot be made with a saw that requires compressed blades.

Although compressed blades have some advantages, they have a major disadvantage whereby it is not possible to cut some small internal details because it is necessary to drill a very large hole to obtain the blade.

Some Hegner scroll saw designs had seen hundreds of holes. As a result, you must take out one end of the saw blade from the handle and insert it into the wood and reassemble it in the handle more times than you can count.

Make sure the process is comfortable and relatively easy. A saw in which the arm can be raised and held in this position is highly desirable, as it facilitates this process, as do tools without tools.

Many Hegner scroll saws offer variable speed, and you would have no problem finding this feature in any price range. Some sliding saws require changing the belt to change the speed. Personally, I recommend the electronic Hegner scroll saw, which is quick to control.

Vibrations are very irritating when cutting and should be kept to a minimum. Some saws vibrate more perfectly in terms of design. The feature tends to depend a lot on the cost of a specific saw. Vibrations can be reduced by mounting the chair on support.

Throat depth is still something you should consider if you are planning to get a Hegner scroll saw for very large projects. A tiny throat limits the size of a piece that you can rotate on the table when cutting. For many, this is not a big deal, as it is quite difficult and unpleasant to swallow a large piece of wood on an escalator. This limitation can also be avoided by using spiral blades that do not require work.

The general layout of the controls and heat settings is a very important consideration. The switch, speed control, and tension lever should ideally be positioned at the end of the saw arm on the toes.

As with most sliding jobs, it is necessary to stop and feed the blade through a hole twelve or even hundreds of times. The tension lever and the switch are much more convenient if they are located close to the upper supports of the blade.

Also, sometimes you want to adjust the control quickly or increase the tension while you’re in the middle of a cut, so it’s nice to have these controls easily.

Some individuals find it easier to use a foot wrench than the electric Hegner scroll saw wrench. Just make sure to buy one of these, which is just a simple on/off button and not a variable speed pedal like the ones used on a seamstress, as this can damage some engines.

A table saw happens to be the most widespread piece of outsized woodworking tools found in stores across the globe.

Table saws are very valuable, and for those who have single woodworking equipment, a firm table chair is almost certainly the best choice.

These types of more portable saws offer flexibility and simplicity with ease of portability.

There are many things you should consider before purchasing a new table saw for your store.

There are two main types of table saws:

  1. Portable table saws, also known as the mobile saw, because it has a closed cabinet in relation to the open base and the new generation of calls saws.
  2. Hybrid bench saws that fill the price difference between contract saws and bench saws. This discussion only refers to cabinet saws, because, in my experience, nothing less will be done for a store that produces good wood. Smaller saws do not have the precision and capacity of bench saws.

Regardless of the type of table saw, the depth of the cut is altered by setting the distance the blade projects over the table surface.

The more the blade protrudes from the table, the deeper the cut in the material. On the other hand, the shorter a blade protrudes from the table, the shallower the cut made in the material to be cut.

The table view is the heart of your store. You will use it more than any other machine, and its precision and capacity will determine the quality and size of what you can produce. It is like choosing someone to marry: ideally, it is for life, and you will have to live with your decision for a long time.

That’s why rushing to buy the first table saw you have ever seen without doing your homework is like a quick wedding in Las Vegas, which is always a gamble.

There are many things that you need to consider before considering before investing your hard-earned money in any table saw.

As I have said several times, any woodworking machine you buy must have a little more capacity than what you are ordering now or what you imagine you can order in the future. Although the price is important, affordability should not be the only determining factor in the purchase decision.

If you can’t afford the model you need, wait as long as possible. Do not insert the saddle with a circular saw that can drive you crazy every day of your life. Take a few minutes to think about what you really need and which machine will best suit the bill.

Lastly, let’s talk a little bit about the features you need to look for and what those features mean after you empty and set up your new saw bench.

These features include engine power, plane, trunnion, blade size, table size, structure, size of permanent support and grills, saw extraction, ease of operation, including lift, lower, and tilt blade left or right, the need for a magnetic switch and the importance of its position, the ease of access in the cabinet, the precision and ease of operation of the fence, the amount of ample space to the right and left of the blade, the safety features and table mobility and shopping.

In addition to the view of the table itself, it is a good idea to create an exit table at the back of the chair, if space allows.

DeWalt DW745 Review

At a Glance:

  • Potent 15 amp, high-torque motor delivers no-load speed of 3,850 rpm
  • Quick, tool-free adjustments with Site-Pro Modular Guarding System
  • Telescoping fence rails
  • Dust-collection connection for fast clean up
  • Three-year limited warranty, one-year free service, and 90-day money-back guarantee

Item Dimensions

Length:    22.80 inches

Width:    23.50 inches

Height:    18.75 inches

Technical Details

  • 15 Amp motor does a good job of cutting hardwoods
  • Rack and pinion fence rails make fence adjustments speedy, even and precise
  • Telescoping fence rails retract to create a minute, portable parcel
  • 16-inch of rip easily cuts a variety of bigger materials
  • Metal roll cage base offers superior durability than plastic bases; Blade can be adjusted zero to 45 degrees for bevel applications

About the Dewalt DW745

The DEWALT DW 745 Table Saw features the Site-Pro Modular Guarding System for application-specific setups that result in speedy, precise cuts. It pairs a portable blueprint with a powerful 15 amp motor and hefty16-inch rip capacity.

This saw comes with blade guards, a miter gauge, a push stick, and a dependable 10-inch, 24-tooth carbide blade to get the saw working for you straight away.

This DEWALT table saw weighs just 45 pounds. You can move the Dewalt DW745 from your garage to some other place with ease.  Many like to pair it with the DEWALT DW7450 Table Saw Stand.

This 10-inch table saw with Site-Pro Modular Guarding System also comes with a DEWALT warranty that includes a 3-year limited warranty, a 1-year free service contract, and a 90-day money-back guarantee.

DW745 Review


  • Plenty of power for the size
  • Small footprint and lightweight
  • Fence is easy to adjust and is accurate
  • Easy cord storage


  • Miter guage could be more durable
  • Safety guard can be troublesome
  • Because of small footprint, it can be difficult to store accessories

Overall – The Dewalt DW745 is a small, compact saw that puts out good power for its size.  The accessories could be better, but they can be swapped out.

Check out other DeWalt tablesaw reviews here for more useful information!

Bosch 4100-09 Review

About the Bosch 4100-09:

With unique design characteristics, the Bosch 4100-09 10-Inch Worksite Table Saw with Gravity-Rise Stand (TS3000) is built for easy, professional, and precise cutting that lets you get jobs done faster.

And with its portable production, which allows for movement across even the roughest ground, it makes a perfect addition to any work site.

The inventive Gravity-Rise Stand (TS3000) uses patented technology to make setup and take down faster than ever, so you can use more time working.

And it’s extremely transportable: the eight-inch treaded pneumatic wheels can get you where you need to go, and the collapsible design minimizes how much room you need for storage.

The stand may be lightweight at 39 pounds, but it’s constructed to last, complete with a powder-coat finish for durability.

(If you are looking for a stand that includes adapter plates to accommodate competitive saws, you can purchase Bosch’s TS2000 here.)

The 15 Amp, 10-inch table saw produces a maximum 4 HP and 3,650 RPM for remarkably clean cuts. Additionally, the tool features soft-start and Constant Response electronics for outstanding power management and constant speed.

It features a 5/8-inch arbor size for use with compatible blades and will make bevel cuts between -2 and 47 degrees in addition to dado cuts up to 13/16 inch.

An optional, distinctive easy-to-read digital measuring display (DC010, not included) can be put on the fence to take measurements for cuts within 1/32 of an inch.

Made from precision machined aluminum for maximum sturdiness and long life, the 29 x 21.5 inch cutting table easily handles large stock for greater ripping capacity up to 25 inches wide.

The top-notch Squarelock Rip Fence is engineered for utmost trueness, so you get maximum precision with every cut.

The pioneering rip fence moves across the cutting table with ease for simple one-handed operation, and it locks in place for making dependable exact cuts.

The first-of-its-kind Smart Guard System is a completely tool-free design that provides unmatched visibility and superior safety, so you can see the cuts better while serving to avoid kickback or blade contact.

The modular three-piece system includes a built-in riving knife, blade guard and anti-kickback pawls, all which install quickly and necessitate no tools.

The Bosch 4100-09 10-Inch Table Saw with Gravity-Rise Stand weighs 99 pounds (saw and stand). It is backed by a one-year limited warranty, 30-day money back guarantee, and one-year service protection plan.

At a Glance:

  • Bosch 10-Inch Worksite Table Saw
  • Gravity-Rise Table Saw Stand with Pneumatic Wheels
  • Squarelock Rip Fence
  • T-slot Miter Gauge
  • Smart Guard

Item Dimensions:

Length:    39.10 inches

Width:    20.90 inches

Height:    30 inches

Technical Details:

  • Squarelock rip fence engineered for maximum trueness
  • Includes the new enhanced award-winning gravity rise stand by Bosch
  • Durable Sub-Base increases tool life by handling job-site abuse
  • Integrated carry handles increase portability
  • Single point bevel movement for consistent accuracy; 1-year warranty


  • Gravity rise stand is very easy to use
  • Precise and accurate cuts
  • Solid motor performance
  • Easily extendable table


  • Wheels could be larger for easier moves
  • Clumsy blade bevel adjustment
  • Stand works great, but has bigger footprint for storage

Overall, a good machine for the money.

Ridgid R4510 Table Saw Review

About the Ridgid R4510

The Ridgid R4510 heavy-duty portable table saw, complete with stand, comes with on-board storage which can hold the rip fence, miter gauge, blade guard assembly, extra blades & the power cord, keeping everything within easy reach for when you are on the go.

The R4510 is powered by a 15 amp motor with a soft start that gives you simple starting, helps your motor life, and more.

This Ridgid R4510 table saw is equipped with a tool-free blade guard, a micro-adjust fence for fine adjustments, and a single-handle bevel/height adjustment for fast and simple blade adjustments.

The Retract-A-Rip fence and rail keeps rip dimension precision to the blade, and provides 25-inch rip capacity while keeping portability.

The “T” slot miter gauge and slots provide fast, simple blade adjustments.

At a Glance:

  • Potent 15 amp, high-torque motor delivers no-load speed of 3,850 rpm
  • Quick, tool-free adjustments with Site-Pro Modular Guarding System
  • Telescoping fence rails
  • Dust-collection connection for fast clean up
  • Three-year limited warranty, one-year free service, and 90-day money-back guarantee

Technical Details

  • Features on-board storage for easy reach
  • Tool-free blade guard
  • 15 amp motor heavy-duty power with soft start
  • Single-handle height/bevel adjustment
  • Micro-adjust fence for fine adjustments


Input: 120 V AC, 15 amps;

Motor: soft start, no-load speed: 4,000 r/min (RPM);

Blade Diameter: 10 inches;

Depth of cut at 45 degrees: 2-1/4 inches;

Depth of cut at 90 degrees: 3-1/8 inches;

Rip Capacity: 25 inches right of blade and 12 inches left of blade;

Weight: 122 pounds

Includes carbide tipped blade, blade guard assembly, rip fence, miter gauge, blade wrenches, and operators’ manual.



  • Practically ready to go out of the box
  • The large wheels work great for a bumpy area
  • Heavy enough to stay in place while ripping
  • Tool storage is outstanding
  • The vacuum/dust port is very good


  • Fairly loud for power output
  • Power could be better
  • Heavy, so can be difficult to transport

Overall – The Ridgid R4510 is a top notch table saw with very accurate accessories that works great right out of the box.  Other table saws are more portable, but this one does a wonderful job regardless.