Best Benchtop Table Saws for the Money

The table saws are the lifeblood of woodworking. Benchtop Table Saw (also known as a portable table saw or Jobsite Table Saw) can save a ton of time for woodworkers on the job site.

Benchtop saws are much more accurate than the handheld circular variety. What you need is to just select and buy a good model.

Benchtops are designed to be put on a table, on a tailgate of a pickup, on the floor or even on the ground.

They’re generally lightweight about 40 to 80 lbs. woodworker can easily carry them to the job site, cut what they need to, then put them back up.

Comparison Table of Benchtop Table Saws:

The table saws chart and reviews guide located below contains almost 05 Benchtop Table Saws for you to compare.

PRODUCTPOWERFULRIP CAPACITYPRICERATINGCHECK ON
DEWALT DW745
120 Volts
15 Amps
1-3/4 HPs
20 Inchs$$4.6
DEWALT DW744XRS
120 Volts
15 Amps
1-3/4 HPs
24-1/2 Inchs$$$4.7
Bosch 4000-09
120 Volts
15 Amps
1-3/4 HPs
25 Inchs$$$$4.5
Bosch 4100-09
120 Volts
15 Amps
1-3/4 HPs
25 Inchs$$4.4
Bosch 4100

120 Volts
15 Amps
1-3/4 HPs
25 Inchs$$$4.6

Advantages of Using Benchtop Table Saws:

  • They are inexpensive than other table saws.
  • Benchtop table saws weigh lighter so more portable compared to others table saws.
  • These are engineered for operation while using another support.
  • Benchtop saws possess a direct drive coming from a general motor.
  • Even a single person can easily lift and carry benchtop saw to job site.
  • The narrower upper portion of benchtop saws reduces the stock’s width (rip able).

Reviews of the 5 Best Benchtop Table Saws:

Here in this post, I will write six best Benchtop Table Saws review. By the help of these Benshtop Table Saws review you will be in a better position to compare the features and prices of Best Benchtop Table Saws , then you can easily decide to buy a Benchtop Table Saw which best meets your needs.

DEWALT DW745 10 Inch Job Site Capacity

DEWALT-DW745-10-Inch-Job-Site-Capacity

DEWALT DW745 is 10-Inch Compact Job-Site Benchtop Table Saw. Its Max Rip Capacity is 20-inch and its 15 amp high performing motor cuts hardwoods very quickly.

With the help of its pinion fence rails and rack a professional woodworker can easily make fast, smooth, and accurate fence adjustments. Its 20-inch a rip can accurately cut a range of larger shelving and trim materials.

The metal roll cage base of DEWALT offers greater durability than the plastic cage bases.

For bevel applications, its blade can be adjusted 0 – 45 degrees. Due to its 15 amp, high-torque motor, this DEWALT Benchtop Table Saw delivers the required power needed for cutting hardwood and pressure-treated lumber.

DEWALT also has a versatile Site-Pro Modular Guarding System by the help of which woodworker can set up for a variety of applications as it allows tool-free adjustment of application-specific guarding components.

Another best feature s that DEWALT table saw just weighs 45 pounds so woodworker can easily move it from workshop to the worksite. (read my review)

The main drawback of DEWALT DW745 is that its arbour is a litter short to support dado blades. It works pretty fine for simple framing cuts but this cannot handle building cabinets. The blade guard of this tool is made of plastic and will possibly break if stressed more.

DEWALT DW744XRS 10 Inch Table Rolling

DEWALT-DW744XRS-10-inch-Table-Rolling

The DEWALT DW744XRS is a versatile 10-Inch Jobsite Benchtop Table Saw with Rolling Stand. It is a portable design with 15 amp powerful motor and it has a max rip capacity of 24-1/2 inches.

This table saw offers application-specific setups with the Site-Pro Modular Guarding System. It has a miter gauge, a 10-inch along with 24-tooth carbide blades and a push stick. DEWALT table saw weigh just 58 pounds and as it also has a compact rolling stand so woodworker can easily move it from workshop to job site.

The rolling stand of DEWALT DW744XRS adds a LOT of weight to the saw. When the worker folds rolling stand up and stand it on end to roll it, the side extension of stand slides out and hits the floor and makes a frustrating sound. 

Bosch 4000-09 10 Inch Benchtop Table Saw

Bosch-4000-09-10-Inch-Worksite-Gravity-Rise

In terms of wood working, a good quality power tool is a big deal. The market lately has a lot to offer with too good to be true promises on labels.

However, the moment you set-up the equipment and started using it, that is when you realize that you were fooled. In this case, Bosch 4000-09 had kept true and justified the reviews made by woodworkers.

From the soft start motor to a good fitting miter gauge, to a reliable and expandable fence, you can never complain. Having this tool is indeed a potential for every woodworker to be proud of.

It appears that this table saw is exactly what every woodcarver requires. It has a large tabletop to accommodate the woods that require cutting, a safe blade guard that can easily be put on and off, and an impressive gravity rise-stand for flexible mobility.

You get no chance to be disappointed with this tool as it seems to have been made out of the ideas of expert woodworkers and carpenters.

If you are a Bosch believer, this can be another excellent addition to your collection. From the installation until the actual operation, the efficiency of the equipment is highly remarkable. (read my review)

Bosch 4100-09 10 Inch Worksite Gravity Rise

The miter gauge of Bosch 4100-09 fits sloppily in the slot. Due to the small size, it has lesser mass, and this increases the vibration while cutting so blade height gradually changes by vibrations and there is no way to lock this. 

The Bosch 4100-09 is a 10-Inch Benchtop Table Saw with Gravity-Rise Stand (TS3000). It is Powerful Table Saw Designed for High-Precision, effortless, efficient, and accurate cutting by the help of which a woodworker can deliver products faster.

Due to its portable construction, it can transfer across even the roughest terrain. Its weight is 99 pounds. This Large Cutting Table with Squarelock Rip Fence provides high-precision cutting with 3,650 rpm.

It also has Smart Guard System for Added Protection and Visibility. It can handles stock up to 25 inches wide.

Bosch 4100 10 Inch Worksite Table

Bosch-4100-09-10-Inch-Worksite-Gravity-Rise-table

The drawback of Bosch 4100 is that the groove in the top of the table that guides the push through for cross cuts is a bit sloppy. So woodworkers need to insert a shim for reducing this slop to get repetitive 90-degree crosscuts. (read my review)

The Bosch 4100 is a 10-Inch Benchtop Table Saw that offers some best new features as well as enhancements of durability and high-performance. The Bosch 4100 has the best Modular Smart Guard System.

It includes a T-slot miter gauge, a squareLock Rip Fence with fence slots and a super-durable sub-base along with carry handles.  Its Squarelock Rip Fence is specially designed for maximum accuracy.

The durable sub-base of this benchtop table saw increases its life as it handles job-site abuse. The integrated carry handles of Bosch 4100 increases portability.

Its single point bevel movement provides consistent accuracy. With all these best features, the price of this Benchtop Table Saw is still cheap.

Conclusion:

Now that you are aware of the advantages and disadvantages of each of the Benchtop Table Saw, you will surely have a new idea what to purchase.

Reviews and certain considerations can be taken note of as a guide for deciding what exactly you need. I also recommend checking out Red Brewer’s Rockwell RK7323 Bladerunner X2 review for another awesome benchtop saw!

By the help of the above best benchtop table saw reviews you come to know about the features of different table saws.

You can easily compare the features of different benchtop table saws and then decide to buy one which suits you best.